Common problems with Blocked Drains in Selby
- ✓ Fat and grease from kitchens
- ✓ Roots from garden trees
- ✓ Silt and debris in surface water drains
- ✓ Shared drains in older homes
- ✓ Wipes and other flushed items
Selby sits on flat land beside the River Ouse. Pipes here have little fall, so a small blockage can cause real trouble. Say on the form which fittings are slow or blocked. Because every home differs, details such as pipe age and type help.
Before you decide who pays, read who is responsible for a blocked drain. Check the simple causes first, then read why a toilet will not flush properly.
Fill in the request form with what you can see, for example slow drains, gurgling, bad smells or standing water. Say which part of your Selby home has the problem. Details such as when it started also help.
Your request is passed on to an engineer. If they can take the job, they get in touch to talk it through and arrange a visit. Reply quickly, since a clear plan speeds things up.
The engineer looks at the drain and may use a camera to find the cause. Ask them to explain what they find, since you will need to agree any work. A camera is not always needed, yet it helps when a blockage keeps returning.
Ask for a written quote before any work begins, because the cost depends on the cause. Work only goes ahead once you agree. If the plan changes on site, ask for the new price in writing.
Ask how they cleared the blockage and how to stop it returning. Then run water through each fitting while the engineer is still there. Report any new gurgling quickly, since it can signal a deeper fault.
Ask the engineer how they will clear the blockage and find the cause. If water keeps pooling, ask about a camera check for sags. Ask for a written quote before work starts. Since a drain can look clear and still hide a fault, check the flow afterwards.
Tip: Homes in Brayton and Thorpe Willoughby should keep outside gullies clear of leaves. This helps most after heavy rain. Since small faults grow, act when you first see a slow drain.
It depends where the blockage sits. A blockage inside your boundary is yours to clear. The public sewer is the water company's job, and your water bill names your supplier. If your neighbours have the same problem, report it to the water company.
Costs depend on how bad the blockage is, and on how easy it is to reach. These are typical UK ranges, not Selby prices. MyJobQuote gives rodding at £80 to £145 and jetting at £70 to £175. HomeServe gives an average of £259 for jetting an external drain. The two sources differ, so ask for a written quote before work starts.
Typical causes include fat and grease from kitchens and roots from garden trees. Yorkshire Water says wipes cause nearly 50% of blockages in Yorkshire, so never flush them, even ones sold as flushable. Put fat in the bin as well. Tell the engineer what went down the drain, since it helps to find the cause.